China Low Cost Harmonic Drive Gearboxes Csg for Servo Motot & Stepper Motor Used in Robot Arms with Best Sales

Product Description

Merchandise Description:

1.Flexspline is a hollow flanging regular cylinder framework.

2.There is a big-diameter hollow shaft gap in the center of the cam of the wave generator. The inner layout of the reducer has a assist bearing.

3.It has a completely sealed composition and is easy to install. It is really suited for the situations where the wire needs to be threaded from the middle of the reducer.

Benefits:

The first:Higher precision,substantial torque

The second:committed complex personnel can be on-the-go to offer style remedies

The third:Manufacturing facility direct product sales wonderful workmanship tough top quality assurance

The fourth:Solution top quality issues have a one particular-12 months warranty time, can be returned for alternative or restore

Firm profile:

 

HangZhou CZPT Engineering Co., Ltd. established in 2014, is committed to the R & D plant of substantial-precision transmission parts. At current, the annual production capability can reach 45000 sets of harmonic reducers. We firmly feel in top quality 1st. All hyperlinks from uncooked components to finished goods are strictly supervised and controlled, which gives a strong foundation for merchandise good quality. Our products are sold all more than the place and overseas.

The harmonic reducer and other large-precision transmission elements were independently produced by the organization. Our organization spends 20% of its income every 12 months on the analysis and advancement of new systems in the market. There are 5 individuals in R & D.

Our advantage is as underneath:

one.7 years of advertising encounter

two. 5-person R & D group to provide you with complex assist

three. It is sold at house and overseas and exported to Turkey and Eire

4. The merchandise top quality is certain with a one-12 months warranty

five. Merchandise can be customized

Strength factory:

Our plant has an whole campus The number of workshops is close to three hundred Whether or not it’s from the manufacturing of uncooked materials and the procurement of uncooked resources to the inspection of completed merchandise, we’re performing it ourselves. There is a comprehensive creation method

HST-III Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at start cease The allowable optimum of the average load torque Maximum torque is authorized in an instantaneous Permit the optimum velocity to be entered Common input pace is permitted Back again hole design and style life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 fifty 6.two .six twenty.7 2.1 7.nine .seven forty.3 4.one 7000 3000 ≤30 10000
eighty nine .9 27 two.seven twelve.7 1.3 fifty four.one five.five
100 nine .9 32 three.3 12.seven 1.3 62.1 6.3
17 50 eighteen.4 1.nine 39 four 29.9 three 80.five 8.two 6500 3000 ≤30 15000
eighty twenty five.three 2.six forty nine.five five 31 three.2 100.1 ten.2
a hundred 27.six two.8 62 six.three forty five 4.6 124.two 12.7
20 fifty 28.eight two.nine sixty four.four 6.six 39 four 112.7 11.5 5600 3000 ≤30 15000
80 39.1 four 85 8.8 fifty four 5.5 146.1 14.9
one hundred forty six four.7 ninety four.3 9.six fifty six five.eight 169.one seventeen.two
one hundred twenty 46 4.seven one hundred ten.2 56 five.8 169.1 17.2
a hundred and sixty forty six four.seven a hundred 10.two fifty six 5.eight 169.1 17.two
25 fifty 44.nine 4.6 113 eleven.five 63 6.five 213.9 21.8 4800 3000 ≤30 15000
80 seventy two.5 seven.4 158 sixteen.one one hundred ten.2 293.three 29.9
a hundred seventy seven.one 7.nine 181 eighteen.four 124 twelve.7 326.6 33.three
a hundred and twenty 77.one 7.nine 192 19.6 124 12.seven 349.six 35.six
32 fifty 87.4 eight.9 248 25.3 124 twelve.seven 439 44.8 4000 3000 ≤30 15000
eighty a hundred thirty five.7 thirteen.eight 350 35.six 192 19.six 653 66.six
a hundred 157.six sixteen.one 383 39.1 248 twenty five.three 744 seventy five.nine
40 one hundred 308 37.2 660 67 432 44 1232 126.seven 4000 3000 ≤30 15000

HSG Parameter:

Model Speed ratio Enter the rated torque at 2000r/min Allowed CZPT torque at commence stop The allowable optimum of the common load torque Maximum torque is allowed in an quick Enable the highest velocity to be entered Regular input velocity is authorized Again gap layout daily life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 seven .7 23 2.3 9 .nine 46 4.7 14000 8500 ≤20 15000
80 ten one 30 3.1 fourteen one.4 61 six.2
a hundred ten one 36 three.seven fourteen 1.four 70 7.2
17 fifty 21 two.one forty four four.five 34 3.4 ninety one 9 10000 7300 ≤20 20000
eighty 29 2.nine 56 five.7 35 3.6 113 twelve
one hundred 31 3.2 70 seven.2 fifty one 5.two 143 fifteen
20 50 33 3.3 73 seven.four forty four 4.5 127 thirteen 10000 6500 ≤20 20000
80 44 four.five ninety six 9.8 61 6.2 165 seventeen
one hundred fifty two 5.3 107 10.nine 64 6.five 191 twenty
a hundred and twenty fifty two five.three 113 eleven.5 sixty four 6.5 191 20
160 52 five.three one hundred twenty 12.2 sixty four 6.5 191 twenty
25 fifty fifty one 5.two 127 13 seventy two seven.3 242 twenty five 7500 5600 ≤20 20000
80 82 8.four 178 18 113 twelve 332 34
one hundred 87 8.nine 204 21 a hundred and forty fourteen 369 38
120 87 eight.9 217 22 140 14 395 forty
32 50 99 10 281 29 one hundred forty fourteen 497 fifty one 7000 4800 ≤20 20000
80 153 sixteen 395 forty 217 22 738 75
a hundred 178 18 433 44 281 29 841 86
forty a hundred 345 35 738 75 484 forty nine 1400 143 5600 4000 ≤20 20000

Exhibition:

Application scenario:

FQA:
Q: What ought to I give when I pick gearbox/pace reducer?
A: The best way is to provide the motor drawing with parameter. Our engineer will check out and suggest the most suited gearbox design for your refer.
Or you can also give beneath specification as effectively:
one) Type, model and torque.
two) Ratio or output pace
three) Doing work problem and connection approach
4) Top quality and set up device name
5) Enter mode and input speed
6) Motor manufacturer design or flange and motor shaft measurement

US $269.8
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Car
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000
US $269.8
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Car
Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Cylindrical Gear
Step: Single-Step

###

Customization:

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 6.2 0.6 20.7 2.1 7.9 0.7 40.3 4.1 7000 3000 ≤30 10000
80 9 0.9 27 2.7 12.7 1.3 54.1 5.5
100 9 0.9 32 3.3 12.7 1.3 62.1 6.3
17 50 18.4 1.9 39 4 29.9 3 80.5 8.2 6500 3000 ≤30 15000
80 25.3 2.6 49.5 5 31 3.2 100.1 10.2
100 27.6 2.8 62 6.3 45 4.6 124.2 12.7
20 50 28.8 2.9 64.4 6.6 39 4 112.7 11.5 5600 3000 ≤30 15000
80 39.1 4 85 8.8 54 5.5 146.1 14.9
100 46 4.7 94.3 9.6 56 5.8 169.1 17.2
120 46 4.7 100 10.2 56 5.8 169.1 17.2
160 46 4.7 100 10.2 56 5.8 169.1 17.2
25 50 44.9 4.6 113 11.5 63 6.5 213.9 21.8 4800 3000 ≤30 15000
80 72.5 7.4 158 16.1 100 10.2 293.3 29.9
100 77.1 7.9 181 18.4 124 12.7 326.6 33.3
120 77.1 7.9 192 19.6 124 12.7 349.6 35.6
32 50 87.4 8.9 248 25.3 124 12.7 439 44.8 4000 3000 ≤30 15000
80 135.7 13.8 350 35.6 192 19.6 653 66.6
100 157.6 16.1 383 39.1 248 25.3 744 75.9
40 100 308 37.2 660 67 432 44 1232 126.7 4000 3000 ≤30 15000

###

Model Speed ratio Enter the rated torque at 2000r/min Allowed peak torque at start stop The allowable maximum of the average load torque Maximum torque is allowed in an instant Allow the maximum speed to be entered Average input speed is allowed Back gap design life
NM kgfm NM kgfm NM kgfm NM kgfm r / min r / min Arc sec Hour
14 50 7 0.7 23 2.3 9 0.9 46 4.7 14000 8500 ≤20 15000
80 10 1 30 3.1 14 1.4 61 6.2
100 10 1 36 3.7 14 1.4 70 7.2
17 50 21 2.1 44 4.5 34 3.4 91 9 10000 7300 ≤20 20000
80 29 2.9 56 5.7 35 3.6 113 12
100 31 3.2 70 7.2 51 5.2 143 15
20 50 33 3.3 73 7.4 44 4.5 127 13 10000 6500 ≤20 20000
80 44 4.5 96 9.8 61 6.2 165 17
100 52 5.3 107 10.9 64 6.5 191 20
120 52 5.3 113 11.5 64 6.5 191 20
160 52 5.3 120 12.2 64 6.5 191 20
25 50 51 5.2 127 13 72 7.3 242 25 7500 5600 ≤20 20000
80 82 8.4 178 18 113 12 332 34
100 87 8.9 204 21 140 14 369 38
120 87 8.9 217 22 140 14 395 40
32 50 99 10 281 29 140 14 497 51 7000 4800 ≤20 20000
80 153 16 395 40 217 22 738 75
100 178 18 433 44 281 29 841 86
40 100 345 35 738 75 484 49 1400 143 5600 4000 ≤20 20000

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Low Cost Harmonic Drive Gearboxes Csg for Servo Motot & Stepper Motor Used in Robot Arms     with Best Sales China Low Cost Harmonic Drive Gearboxes Csg for Servo Motot & Stepper Motor Used in Robot Arms     with Best Sales
editor by czh 2023-01-30