China Xugong Lw500kn 5 Ton Loaders Sold at a Low Price, Well-Known Brands in China, The Original Engine, Engine Gearbox Warranty for Two Years gearbox and motor

Item Description

Swift Particulars

Manufacturer XUGONG
Design LW500KN
Calendar year 2018
Bodyweight sixteen.8ton

Provide Capacity

Provide Potential

5 Device/Models per 7 days

Packaging & Supply

Packaging Particulars

container/flat rack/bulk/up to youPort

ZheJiang (ocean shipping and delivery/land transportation)

Lead Time:

Quantity(Models)    1 – 1    >1

Est. Time(days)    7   To be negotiated

Product description:

1>Good working condition machine in ZheJiang China

2>All elements are effectively-maintenanced, unique. can be inspected

3>Low operating hours, authentic paint, cheap and high quality

4>Spare elements offered, very best working equipment for you 

Many thanks for your inquiry and any more more details need to have, make sure you don’t wait to make contact with me.

 

We also have many other people machines in inventory(least expensive and unique), remember to have a general seem as below contents:

Utilised Excavator

CAT

200,235,305,307,312,320,330,324,325,345(From Model B to Design D)

Hitachi

EX60, EX100, EX100WD, EX120, EX200, EX200LC, EX220,220, EX300,EX350,EX450,ZX60,ZX70,ZX75,ZX120,ZX160,ZX200,ZX2,
ZX230,ZX270,ZX450,ZX470

Komatsu

PC50, PC60, PC100, PC120, PC130, PC200, PC210, PC220, PC300, PC350, PC400, PC450

Kobelco

SK100, SK120, SK200, SK350

Doosan

140W,150W,210W,150LC,200LC,220LC,225LC,300LC,420LC,500LC-7

Daewoo

DH55, 60, a hundred thirty, one hundred fifty, 220, 225, three hundred

Hyundai

130w, 150w, two hundred, 210, 220, 225, 290, 305

Volvo: 

EC140,210, 240, 290,360,460

Used Bulldozer

CAT

D4G,D5M,D6D, D6H, D6R, D6G, D7H, D7G, D7R, D8K, D8R, D8N, D8L, D9N, D9R, D10N

Komatsu

D50P, D60P, D65, D85, D155

Used Loader

CAT

916, 924, 928, 936, 938, 950, 966, 980, 988 (From Product B to Design H)

Komatsu

WA100, 230, 250, 300, 320, 350, 360, 380, 400, 430, 470

Kawasaki:

70, 70B, 80Z, 85Z, 90, 90Z, 95Z

Used Motor Grader

CAT

12G, 14G, 120G, 140G, 16G, 140H, 160H, 140K

Komatsu

GD511A, 605A, 623

Utilized Backhoe Loader

JCB

3CX, 4CX,

CAT

416,436

Utilised Forklift

Komatsu, Toyota, TCM, Heli, Nissan, Mitsubish (From 2.5 ton to thirty ton)

 Used Road roller

DYNAPAC

CA25, CA30, CA511 Serials

BOMAG

213, 217, 219, 225 Serials

 Used Crane

KATO

NK200E, NK250E, NK300E, NK400E, NK500E, NK800E, NK1000, NK1200, NK1200E

KR25H, KR45H, KA300,KS500,KR250E, KR450

TADANO

TG250, TL250, TL250E, TL300E, TG300E, TG350E, TG450E, GT550E, TG550E, TG650E, GT650E, TG1000E, TG1200E, TG1200M, TG1600M,KR250E,KR350E, TR250M, TR300M, AZ300D, AR350, TR450E, TR500M

HITACHI

KH700, KH120T, KH125, KH150, KH180

KOBELCO

50T, 100T, 120T, 300T

SUMITOMO

50T, 100T, 200T

Equipment Equipment

bucket tooth, keys, tires, observe sneakers, crushing hammer, breaker, engine, screw, nut, and other connected merchandise.

Business information:

  ZheJiang YingJue trading Co., Ltd. is a professional revenue of development equipment and employed development equipment with several several years of upkeep and product sales encounter of the equipment business.
   Now the new business is situated in Xihu (West Lake) Dis. District, ZheJiang , with 1000’s of nicely-identified model excavators, rollers, loaders, bulldozers, cranes, crawler cranes and forklifts. 
   We can make sure the wants of the majority of consumers, so that customers CZPT on the internet at home to realize the price tag of all sorts of equipment. 
   We’re massive welcome our clients to appear go to us, take a look at the device and consult for any demand equipment from us.
   Address: No.3935A, Xihu (West Lake) Dis. Road, Xihu (West Lake) Dis. District,ZheJiang  

FAQ
one. How is the high quality of the equipment deliver to your nation?
A :  All the equipment we provide to our buyer is in large top quality, exceptional operating functionality and all set to function.

2. What is your payment expression? 
A : Usually, for FOB is forty% as deposit advance, 60% before loading the equipment. CIF is also forty% as deposit, 60% just before loading the device.

3. How prolonged will it supply to your place? 
A : The estimation times for produce to your nation is close to fifteen – 45 times.

four. Will our business offer any services to the device?
A : Yes! Prior to we supply the equipment, we will take a look at, verify, provider, upkeep and clear it the machine. 

IF THE Machine YOU UNSATISFY, WE WILL Totally REFUND THE Money OUR Consumer. THIS IS OUR Firm Principle! WE Assure OUR Merchandise Good quality IS THE MOST Crucial!!!
ANY INQUIRES, Don’t Be reluctant TO Phone US!  

 

After-sales Service: for Machinery Warranty
Warranty: Two Years
Certification: ISO
Condition: Used
Rated Load: 3-6t
Transmission: Hydraulic – Mechanical

###

Customization:

###

Brand XUGONG
Model LW500KN
Year 2018
Weight 16.8ton

###

We also have many others machines in stock(cheapest and original), please have a general look as below contents:
Used Excavator
CAT
200,235,305,307,312,320,330,324,325,345(From Model B to Model D)
Hitachi
EX60, EX100, EX100WD, EX120, EX200, EX200LC, EX220,220, EX300,EX350,EX450,ZX60,ZX70,ZX75,ZX120,ZX160,ZX200,ZX2,
ZX230,ZX270,ZX450,ZX470
Komatsu
PC50, PC60, PC100, PC120, PC130, PC200, PC210, PC220, PC300, PC350, PC400, PC450
Kobelco
SK100, SK120, SK200, SK350
Doosan
140W,150W,210W,150LC,200LC,220LC,225LC,300LC,420LC,500LC-7
Daewoo
DH55, 60, 130, 150, 220, 225, 300
Hyundai
130w, 150w, 200, 210, 220, 225, 290, 305
Volvo: 
EC140,210, 240, 290,360,460
Used Bulldozer
CAT
D4G,D5M,D6D, D6H, D6R, D6G, D7H, D7G, D7R, D8K, D8R, D8N, D8L, D9N, D9R, D10N
Komatsu
D50P, D60P, D65, D85, D155
Used Loader
CAT
916, 924, 928, 936, 938, 950, 966, 980, 988 (From Model B to Model H)
Komatsu
WA100, 230, 250, 300, 320, 350, 360, 380, 400, 430, 470
Kawasaki:
70, 70B, 80Z, 85Z, 90, 90Z, 95Z
Used Motor Grader
CAT
12G, 14G, 120G, 140G, 16G, 140H, 160H, 140K
Komatsu
GD511A, 605A, 623
Used Backhoe Loader
JCB
3CX, 4CX,
CAT
416,436
Used Forklift
Komatsu, Toyota, TCM, Heli, Nissan, Mitsubish (From 2.5 ton to 30 ton)
 Used Road roller
DYNAPAC
CA25, CA30, CA511 Serials
BOMAG
213, 217, 219, 225 Serials
 Used Crane
KATO
NK200E, NK250E, NK300E, NK400E, NK500E, NK800E, NK1000, NK1200, NK1200E

KR25H, KR45H, KA300,KS500,KR250E, KR450
TADANO
TG250, TL250, TL250E, TL300E, TG300E, TG350E, TG450E, GT550E, TG550E, TG650E, GT650E, TG1000E, TG1200E, TG1200M, TG1600M,KR250E,KR350E, TR250M, TR300M, AZ300D, AR350, TR450E, TR500M
HITACHI
KH700, KH120T, KH125, KH150, KH180
KOBELCO
50T, 100T, 120T, 300T
SUMITOMO
50T, 100T, 200T
Machine Accessories
bucket tooth, keys, tires, track shoes, crushing hammer, breaker, engine, screw, nut, and other related products.
After-sales Service: for Machinery Warranty
Warranty: Two Years
Certification: ISO
Condition: Used
Rated Load: 3-6t
Transmission: Hydraulic – Mechanical

###

Customization:

###

Brand XUGONG
Model LW500KN
Year 2018
Weight 16.8ton

###

We also have many others machines in stock(cheapest and original), please have a general look as below contents:
Used Excavator
CAT
200,235,305,307,312,320,330,324,325,345(From Model B to Model D)
Hitachi
EX60, EX100, EX100WD, EX120, EX200, EX200LC, EX220,220, EX300,EX350,EX450,ZX60,ZX70,ZX75,ZX120,ZX160,ZX200,ZX2,
ZX230,ZX270,ZX450,ZX470
Komatsu
PC50, PC60, PC100, PC120, PC130, PC200, PC210, PC220, PC300, PC350, PC400, PC450
Kobelco
SK100, SK120, SK200, SK350
Doosan
140W,150W,210W,150LC,200LC,220LC,225LC,300LC,420LC,500LC-7
Daewoo
DH55, 60, 130, 150, 220, 225, 300
Hyundai
130w, 150w, 200, 210, 220, 225, 290, 305
Volvo: 
EC140,210, 240, 290,360,460
Used Bulldozer
CAT
D4G,D5M,D6D, D6H, D6R, D6G, D7H, D7G, D7R, D8K, D8R, D8N, D8L, D9N, D9R, D10N
Komatsu
D50P, D60P, D65, D85, D155
Used Loader
CAT
916, 924, 928, 936, 938, 950, 966, 980, 988 (From Model B to Model H)
Komatsu
WA100, 230, 250, 300, 320, 350, 360, 380, 400, 430, 470
Kawasaki:
70, 70B, 80Z, 85Z, 90, 90Z, 95Z
Used Motor Grader
CAT
12G, 14G, 120G, 140G, 16G, 140H, 160H, 140K
Komatsu
GD511A, 605A, 623
Used Backhoe Loader
JCB
3CX, 4CX,
CAT
416,436
Used Forklift
Komatsu, Toyota, TCM, Heli, Nissan, Mitsubish (From 2.5 ton to 30 ton)
 Used Road roller
DYNAPAC
CA25, CA30, CA511 Serials
BOMAG
213, 217, 219, 225 Serials
 Used Crane
KATO
NK200E, NK250E, NK300E, NK400E, NK500E, NK800E, NK1000, NK1200, NK1200E

KR25H, KR45H, KA300,KS500,KR250E, KR450
TADANO
TG250, TL250, TL250E, TL300E, TG300E, TG350E, TG450E, GT550E, TG550E, TG650E, GT650E, TG1000E, TG1200E, TG1200M, TG1600M,KR250E,KR350E, TR250M, TR300M, AZ300D, AR350, TR450E, TR500M
HITACHI
KH700, KH120T, KH125, KH150, KH180
KOBELCO
50T, 100T, 120T, 300T
SUMITOMO
50T, 100T, 200T
Machine Accessories
bucket tooth, keys, tires, track shoes, crushing hammer, breaker, engine, screw, nut, and other related products.

Key Market Insights Related to Worm Reduction Gearboxes

A gearbox is a mechanical device that allows you to shift between different speeds or gears. It does so by using one or more clutches. Some gearboxes are single-clutch, while others use two clutches. You can even find a gearbox with closed bladders. These are also known as dual clutches and can shift gears more quickly than other types. Performance cars are designed with these types of gearboxes.
gearbox

Backlash measurement

Gearbox backlash is a common component that can cause noise or other problems in a car. In fact, the beats and sets of gears in a gearbox are often excited by the oscillations of the engine torque. Noise from gearboxes can be significant, particularly in secondary shafts that engage output gears with a differential ring. To measure backlash and other dimensional variations, an operator can periodically take the output shaft’s motion and compare it to a known value.
A comparator measures the angular displacement between two gears and displays the results. In one method, a secondary shaft is disengaged from the gearbox and a control gauge is attached to its end. A threaded pin is used to secure the differential crown to the secondary shaft. The output pinion is engaged with the differential ring with the aid of a control gauge. The angular displacement of the secondary shaft is then measured by using the dimensions of the output pinion.
Backlash measurements are important to ensure the smooth rotation of meshed gears. There are various types of backlash, which are classified according to the type of gear used. The first type is called circumferential backlash, which is the length of the pitch circle around which the gear rotates to make contact. The second type, angular backlash, is defined as the maximum angle of movement between two meshed gears, which allows the other gear to move when the other gear is stationary.
The backlash measurement for gearbox is one of the most important tests in the manufacturing process. It is a criterion of tightness or looseness in a gear set, and too much backlash can jam a gear set, causing it to interface on the weaker part of its gear teeth. When backlash is too tight, it can lead to gears jamming under thermal expansion. On the other hand, too much backlash is bad for performance.

Worm reduction gearboxes

Worm reduction gearboxes are used in the production of many different kinds of machines, including steel and power plants. They are also used extensively in the sugar and paper industries. The company is constantly aiming to improve their products and services to remain competitive in the global marketplace. The following is a summary of key market insights related to this type of gearbox. This report will help you make informed business decisions. Read on to learn more about the advantages of this type of gearbox.
Compared to conventional gear sets, worm reduction gearboxes have few disadvantages. Worm gear reducers are commonly available and manufacturers have standardized their mounting dimensions. There are no unique requirements for shaft length, height, and diameter. This makes them a very versatile piece of equipment. You can choose to use one or combine several worm gear reducers to fit your specific application. And because they have standardized ratios, you will not have to worry about matching up multiple gears and determining which ones fit.
One of the primary disadvantages of worm reduction gearboxes is their reduced efficiency. Worm reduction gearboxes usually have a maximum reduction ratio of five to sixty. The higher-performance hypoid gears have an output speed of around ten to twelve revolutions. In these cases, the reduced ratios are lower than those with conventional gearing. Worm reduction gearboxes are generally more efficient than hypoid gear sets, but they still have a low efficiency.
The worm reduction gearboxes have many advantages over traditional gearboxes. They are simple to maintain and can work in a range of different applications. Because of their reduced speed, they are perfect for conveyor belt systems.
gearbox

Worm reduction gearboxes with closed bladders

The worm and the gear mesh with each other in a combination of sliding and rolling movements. This sliding action is dominant at high reduction ratios, and the worm and gear are made of dissimilar metals, which results in friction and heat. This limits the efficiency of worm gears to around thirty to fifty percent. A softer material for the gear can be used to absorb shock loads during operation.
A normal gear changes its output independently once a sufficient load is applied. However, the backstop complicates the gear configuration. Worm gears require lubrication because of the sliding wear and friction introduced during movement. A common gear arrangement moves power at the peak load section of a tooth. The sliding happens at low speeds on either side of the apex and occurs at a low velocity.
Single-reduction gearboxes with closed bladders may not require a drain plug. The reservoir for a worm gear reducer is designed so that the gears are in constant contact with lubricant. However, the closed bladders will cause the worm gear to wear out more quickly, which can cause premature wear and increased energy consumption. In this case, the gears can be replaced.
Worm gears are commonly used for speed reduction applications. Unlike conventional gear sets, worm gears have higher reduction ratios. The number of gear teeth in the worm reduces the speed of a particular motor by a substantial amount. This makes worm gears an attractive option for hoisting applications. In addition to their increased efficiency, worm gears are compact and less prone to mechanical failure.

Shaft arrangement of a gearbox

The ray-diagram of a gearbox shows the arrangement of gears in the various shafts of the transmission. It also shows how the transmission produces different output speeds from a single speed. The ratios that represent the speed of the spindle are called the step ratio and the progression. A French engineer named Charles Renard introduced five basic series of gearbox speeds. The first series is the gear ratio and the second series is the reverse gear ratio.
The layout of the gear axle system in a gearbox relates to its speed ratio. In general, the speed ratio and the centre distance are coupled by the gear axles to form an efficient transmission. Other factors that may affect the layout of the gear axles include space constraints, the axial dimension, and the stressed equilibrium. In October 2009, the inventors of a manual transmission disclosed the invention as No. 2. These gears can be used to realize accurate gear ratios.
The input shaft 4 in the gear housing 16 is arranged radially with the gearbox output shaft. It drives the lubricating oil pump 2. The pump draws oil from a filter and container 21. It then delivers the lubricating oil into the rotation chamber 3. The chamber extends along the longitudinal direction of the gearbox input shaft 4, and it expands to its maximum diameter. The chamber is relatively large, due to a detent 43.
Different configurations of gearboxes are based on their mounting. The mounting of gearboxes to the driven equipment dictates the arrangement of shafts in the gearbox. In certain cases, space constraints also affect the shaft arrangement. This is the reason why the input shaft in a gearbox may be offset horizontally or vertically. However, the input shaft is hollow, so that it can be connected to lead through lines or clamping sets.
gearbox

Mounting of a gearbox

In the mathematical model of a gearbox, the mounting is defined as the relationship between the input and output shafts. This is also known as the Rotational Mount. It is one of the most popular types of models used for drivetrain simulation. This model is a simplified form of the rotational mount, which can be used in a reduced drivetrain model with physical parameters. The parameters that define the rotational mount are the TaiOut and TaiIn of the input and output shaft. The Rotational Mount is used to model torques between these two shafts.
The proper mounting of a gearbox is crucial for the performance of the machine. If the gearbox is not aligned properly, it may result in excessive stress and wear. It may also result in malfunctioning of the associated device. Improper mounting also increases the chances of the gearbox overheating or failing to transfer torque. It is essential to ensure that you check the mounting tolerance of a gearbox before installing it in a vehicle.

China Xugong Lw500kn 5 Ton Loaders Sold at a Low Price, Well-Known Brands in China, The Original Engine, Engine Gearbox Warranty for Two Years     gearbox and motor	China Xugong Lw500kn 5 Ton Loaders Sold at a Low Price, Well-Known Brands in China, The Original Engine, Engine Gearbox Warranty for Two Years     gearbox and motor
editor by czh 2023-01-19